Pellet Stove Dealers Near Me
Pellet stoves use solid combustible pellets made of compressed sawdust or wood waste to warm your home. Some models burn biofuels such as nutshells and corn kernels.
Pellet stoves are not equipped with chimneys and require electrical power to run the auger that feeds pellets into the fire. Certain manufacturers provide battery backup systems to ensure that your stove is able to function in the event of power failure.
Freestanding Pellet Stoves
Homeowners seeking supplemental heat often choose freestanding pellet stoves. They can be used to heat a single space or several and are also easy to clean and operate. They burn pellets made from compressed sawdust that looks like the kind your pet rabbit might eat. The hopper holds the pellets and an electric auger is fed them into the firebox to spark them. When they burn, the wood pellets produce heat that radiates out into the room, and then circulates through a blower. This kind of heat is more affordable than gas furnaces or ductless mini split, and more attractive than traditional wood stoves.
Pellet stoves may be minimalist in design and is less intrusive than wood-burning models. They are also easier to maintain than fireplaces and feature digital controls that make it easy to control the amount of heat generated. Some models can be hooked up to a thermostat and programmed, which helps homeowners reduce their heating costs.
You should select the stove that has been approved for efficiency and clean combustion by the U.S. Environmental Protection Agency and also by an outside organization like the Pellet Fuels institute (PFI). Also, you should look for an Underwriters Laboratories label or Canadian ULC certification that shows the stove is safe and has met standards.
Since these appliances use electricity to run their automatic features, you'll need an idea of what to do in the event of an outage. Some models, like the Piazzetta Marcella 2.0, have batteries which keeps their pellet feeders and fans running even when the power goes out.
Pellet Stoves with Pellet Inserts
Pellet stove inserts can be inserted into fireplaces to replace a traditional wood-burning fireplace. They are high-efficiency and offer a lot of heating power, similar to freestanding pellet stoves. They also use renewable fuels instead of fossil gases or wood, and do not produce greenhouse gases. The savings in energy costs can add up over time. You may also be eligible for a 30% credit on the cost of your insert (up to $2,000 per year).
The primary distinction between pellets and wood fireplace inserts is that they burn compressed milled wood byproducts, rather than seasoned wood. This lets them burn more hot and quicker than natural wood-burning fireplaces. This reduces emissions and improves energy efficiency. They are also easier to use, using less ash. They have auto ignition and self-starting features that make it easy to ignite the fire. The fire is continuously fed from an hopper, which means it isn't necessary to manually feed it, as you would with a traditional wood-burning fireplace.
Pellet fireplace inserts have a few disadvantages. mini pellet stove of them is that they require a significant amount of dry storage space to store the pellet fuel. They're also dependent on electricity to power their automatic features, which means they may not be a viable option during a power outage. Furthermore, certain models emit acoustic noise which could be the best choice for a quiet home.
Custom Pellet Stoves
Pellet stoves offer a clean efficient and energy-efficient alternative to traditional wood stoves. Pellets made from compressed wood sawdust or other wood byproducts are used, which is more environmentally friendly than burning wood. They also produce less pollution than wood stoves. Pellet stoves are becoming increasingly popular due to their low operating cost and ease of use. There are a variety of options available for you to choose from, whether you're looking for a pellet heater for your basement or a new stove for your home.
If you are considering buying a pellet stove, find a dealer with experience in these hearth products. A good dealer can offer professional advice, install your stove in a proper manner and maintain it when required. A factory-trained technician is a key element of the process and will assist you in understanding the specifics of your stove's operation and maintenance requirements.
Choosing the best stove for your home is contingent on the heating requirements you have and the dimensions of your home. You should generally select one that has the equivalent of 5,000 British Thermal Units (BTUs), or heating power, for each 200 square feet of living space. Also, you should consider how much money you are willing to pay for heating fuel as well as any other sources in your home.
It is crucial to remember that pellet stoves were designed to be a second heating source, not a primary one. They are not intended to replace furnaces and should not be used in homes with inadequate insulation. They should only be used in areas of your home that have sufficient access to a venting system, which is typically installed with an existing chimney. Pellet stoves can also require electricity to run their automatic features such as the fan and pellet feeder. If power goes out the devices will operate manually or with battery backup systems.
Pellet Stove Repair
Pellet stoves require regular maintenance to operate safely and efficiently. To avoid costly repairs in the future it is important to be aware of the signs of a stove that is having problems. If the flame is dancing around in a circle with black tips, it's likely that there is not enough air. This issue could be caused by dirty burners, a clogged auger or the hopper, or an inadequate heating setting. It is best to consult with an expert in this case.
Professionals can evaluate the requirements of a pellet stove and perform the necessary maintenance for between $100 and $150 per hour. This includes cleaning, fixing or replacing the exhaust fan, and lubricating moving components. Repair costs are contingent on how complicated the problem is. A qualified technician should estimate the cost prior to doing any work.
The most common problems that require professional assistance include soot or smoke coming from the chimney, low heat, or noisy operation. These problems can be caused by a faulty damper or blower. A local fireplace technician can replace the blower or damper for $380-$550.
Another common problem is the auger motor failing. This could be a problem because it can affect the stove's ability of feeding fuel into the burn pan. The auger motor is priced between $80 and $150, and a fireplace specialist in your area can take up to three hours to install. You should also clean the hopper as well as the firepit on a regular basis. This will decrease the amount of ash that collects on the glass and blocks the view of the flame. A local fireplace technician, for example could take off the burnpot cover and use a brush to sweep the ash that has accumulated.
Pellet Stove Installation
A pellet stove can be installed in a new home or converted into an insert fireplace that burns wood. Prices for installation vary based on location, but they begin at $1,000 for freestanding models and range from $3,000 to $5,000 for a wall-mounted unit. Venting systems can range from $1,200 to $1,200 or $500 depending on whether you need a horizontal vent or a ceiling vent or one that requires a chimney.
Pellet stoves come with a host of advantages which make them more convenient and affordable than other sources of heating. They consume less fuel than gas or wood stoves and are able to turn on and off automatically at specific times. They also allow you to select between low and high temperature settings making them more flexible than traditional wood stoves.
The size and type of the pellet stove you'll need will depend on the amount of heat you'll need to generate for your home. As a rule of thumb you will require about 5,000 British Thermal Units (BTUs) to heat 200 square feet of living space. However, factors like the climate and insulation can affect this calculation.
Think about how much fuel you'll need and where you will keep it when looking to purchase an all-new pellet stove. A dealer can help you determine the number of BTUs your home requires by visiting the place and taking measurements. A professional will suggest an electric stove that can produce enough heat for your home based on the amount of living space you would like to warm.
It is important to locate a pellet stove near an outlet that can handle 110 voltages. It is a good idea to install an additional generator that will keep the pellet stove running in the event of an power outage.